How to Upgrade from Windows vCenter 5.5 to VCSA 6.5 including SRM

In last couple of days, I heard this question many times for below scenario. Since 5.5 is about to expire this month, so IT admins are upgrading their environment to new version of vSphere. Though going directly to 6.7 is something that do not meet N-1 requirement for most of the environment. Hence most of the admin prefers to put environment on vSphere 6.5.

Very first question everyone think about is –

  • Does upgradation path from vCenter 5.5 to VCSA 6.5 is supported? Answer is YES.
  • Does upgradation path from VMware SRM 5.8.1 to 6.5 is supported? Answer is NO. You need to upgrade VMware SRM 5.8.1 to 6.0 or 6.1.2, and then upgrade SRM 6.0 to 6.5.

Here we have details of existing environment and requirement which need to meet.

Existing Environment: –

  • Windows based vCenter Server – Version 5.5
  • Site Recovery Manager – Version 5.8
  • Replication Type in SRM – vSphere Replication

Requirement: –

  • Appliance based vCenter Server (VCSA) – Version 6.5
  • Site Recovery Manager – Version 6.5
  • Replication Type in SRM – vSphere Replication

Sequence to upgrade Windows based vCenter 5.5 to VCSA 6.5: –

SRM

If you are planning to upgrade your vSphere environment, follow this order to upgrade vCenter server, SRM, and vSphere Replication.

Overview of Upgrade order: –

  • Since vCenter server 5.5 doesnt have PSC server, you need to make sure that you install PSC when prior to upgrade vCenter server.
  • Upgrade PSC and vCenter Server in Protected Site.
  • Upgrade vSphere Replication appliance in Protected Site.
  • Upgrade Site Recovery Manager in Protected Site.
  • Perform the same steps in Recovery Site.
  • If you are using array based replication in SRM, you need to upgrade SRA in both site.
  • Once up gradation sequence has been done, verify vCenter server and SRM sites status.
  • Upgrade ESXi host in both protected and recovery sites.

Step by Step Guide to Upgrade vSphere Environment: –

Prerequisites: –

  • Download vCenter Server Appliance ISO image, VMware SRM 6.5 setup, and vSphere Replication appliance from VMware download portal.
  • Ensure that you have a windows machine from where you will initiate the installation.
  • Ensure to get SSO credentials and VCDB and SRM DB database handy.
  • Note down the details of ESXi Host where you will deploy VCSA appliance.
  • If you want to use the same name of vCenter Server which you are using currently, you need to rename windows vCenter VM with alternate name.
  • If you are using VMware SRM 5.8.1, then you need to upgrade it to VMware SRM 6.0 and then you can upgrade it to Vmware SRM 6.5.

vCenter Server Upgrade: –

There are two stage process to upgrade vCenter Server.

  1. Deployment of VCSA
  2. Migration of Windows vCenter Data to newly deployed VCSA.

The-VCSA-6.5-Stages

Stage 1:

  • Now mount VCSA image ISO in any windows machine. Explore the ISO folder and navigate to VMware-Migration-Assistant.exe. Right click and click on Run as Administrator.
  • Follow the steps and provide SSO credentials.
  • Once you will get black screen with a message – Waiting for migration to Start, Switch to ISO folder again.
  • Go to vcsa-ui-installer/win32 folder and click on Installer and Run as administrator.
  • On windows screen, you will get four options.
    • Install
    • Upgrade
    • Migrate
    • Restore
  • Click on Migrate and follow the steps to complete the deployment of VCSA.

Stage 2:

  • Once deployment gets complete, you need to switch to stage 2. Here you need to migrate existing windows vCenter server data to VCSA.
  • During the data migration the Windows vCenter will be shutdown and the VCSA will be configured with its IP address.
  • Follow the steps and complete stage 2. Now you can access vCenter server using Web client.

 

Upgrade vSphere Replication Appliance: –

Download vSphere replication appliance and upgrade appliance by following below VMware document.

https://docs.vmware.com/en/vSphere-Replication/6.5/com.vmware.vsphere.replication-admin.doc/GUID-30083484-FB13-485E-AEC9-0695EADB7B3D.html

Upgrade VMware Site Recovery Manager: –

Follow below article to upgrade VMware Site Recovery Manager.

https://docs.vmware.com/en/Site-Recovery-Manager/6.5/com.vmware.srm.install_config.doc/GUID-4642FBA0-6D25-4B68-912A-1BDD8D02EF00.html

 

 

 

 

 

 

Learn SRM – Part 15 – Perform Real Recovery during Disaster Scenario in VMware SRM 6.5

In last article, we saw how to perform a test DR or you can say that Test Drill using Site Recovery Manager.

In this article, we are going to explore a live situation if you face a real Disaster then how will you recover Virtual Machines from Protected Site to Recovery Site.

Step by Step: –

  • Login to Site Recovery Manager Console.
  • Go to Monitor tab under Recovery Plan Section.
  • Click on Red icon.

2018-08-28-01_18_27-vSphere-Web-Client.jpg

  • Here you will get a different options. In test recovery, you didn’t had this option. But if you perform a real DR, then you have two options.
  1. Planned Migration
  2. Disaster Recovery
  • If you want to perform a real recovery during any Disaster, you have to choose option 2 which is for Disaster Recovery scenario.
  • Accept Recovery Confirmation and Click on Next.

2018-08-28 01_18_53-vSphere Web Client

  • Disaster Recovery is ready to start. Click on Finish.

2018-08-28 01_19_31-vSphere Web Client

  • Real Recovery has been started. You can monitor the status of recovery here .

2018-08-28 01_20_53-vSphere Web Client

So that’s all from VMware Site Recovery Manager module. We are closing this module here. If you have not gone through with earlier articles, please go through with that to get a detailed information on VMware SRM. I will come back with the new topic next week. Stay tuned to Cloud Pathshala.

Once again Thank you so much for being part of Cloud Pathshala and visiting here. Do share you inputs in comment box. If you want to add on here, send us email at admin@cloudpathshala.com. Follow us on our social media platform to stay updated and get notification for any new article. You can find us any platform at @CloudPathshala. You can subscribe our Youtube change at youtube.com/Cloudpathshala

If you found this module or article useful, please do share with your friends. I will say a good bye for now. Let’s meet again in next module on different topic.

Take a look in below topics, explore and learn Site Recovery Manager: –

Learn SRM – Part 14 – Perform Cleanup Activity in VMware SRM 6.5

Once our Testing has been completed, we need to run cleanup of the environment. Site Recovery Manager performs several cleanup operations after a test.

  • Powers off the recovered virtual machines.
  • Replaces recovered virtual machines with placeholders, preserving their identity and configuration information.
  • Cleans up replicated storage snapshots that the recovered virtual machines used during the test.

Step by Step: –

  • Login to VMware Site Recovery Manager Console.
  • Go to Monitor Tab and Click on icon highlighted in Red box.

2018-08-28 01_17_31-vSphere Web Client

  • Ready the Informational message. you may also choose Force Cleanup option if normal cleanup doesn’t work properly.
  • Click on Next

2018-08-28 01_17_34-vSphere Web Client

  • Cleanup Activity is ready to complete. Click on Finish to start the activity.

2018-08-28 01_17_40-vSphere Web Client

  • Monitor the Status of Cleanup Activity.

2018-08-28 01_17_44-vSphere Web Client

  • Cleanup has been done. Status is again in Ready State now. You can see the Green Run icon has been highlighted.

2018-08-28 01_18_18-vSphere Web Client

That’s all about Cleaning up our environment after Test Disaster Recovery. I will also add one more article which will show you how to Perform Recovery during Real Disaster. Stay Tuned to next article.

Take a look in below topics, explore and learn Site Recovery Manager: –

Learn SRM – Part 13 – Perform Test Drill using VMware SRM 6.5

In earlier posts, we have gone through with the Installation and Configuration of Vmware Site Recovery Manager. We explored both version 8.1 as well as 6.5.

We are no on final stage of our planning. SRM is ready for your environment. You can now plan Disaster Recovery Test to check the functionality. Here we are going to perform the same. We have the recovery plan configured according to our requirement, now let’s initiate the test drill. Remember that when you test a recovery plan, SRM uses the test network to test the VMs and keep Recovered Virtual machines in a bubble network. During test drill, your production Virtual machines will remain powered on and there is no impact on Production environment. Testing a Recovery Plan creates a snapshot on the recovery site of all the disk files of the virtual machines in the plan.

Let’s move to the Step by Step Guide to Perform a Test Drill: –

  • Login to Site Recovery Manager Console.
  • Go to Recovery Plans and Click on Recovery Plan you want to initiate. You can group your virtual machines in Protection Groups and later can add those protection groups to the recovery group. Now you will have choice which Virtual Machines you want to test.

2018-08-28 00_29_06-vSphere Web Client

  • Go to Monitor tab and Click on Green Run Icon.

2018-08-28 00_29_10-vSphere Web Client

  • Select Replicate Recent changes to recovery site. Click Next.

2018-08-28 00_29_27-vSphere Web Client

  • Test is ready to start. Click on Finish.

2018-08-28 00_29_34-vSphere Web Client

  • You can check the status from here. There are multiple steps which it will perform. Make sure that it give a success message to all steps. In case you get any failure message, you need to verify and rectify that issue again.

2018-08-28 00_29_44-vSphere Web Client

  • You can also go to Objects tab under Recovery Plan and Check the overall status of testing.

2018-08-28 00_29_36-vSphere Web Client

  • Recovery still in progress but moved to different stage now. Keep an eye on this.

2018-08-28 00_30_33-vSphere Web Client

This is all about Test Recovery or you can say Test Drill of Disaster Recovery. Next we are moving to Cleanup Activity.

Take a look in below topics, explore and learn Site Recovery Manager: –

Learn SRM – Part 12 – Configure Recovery Plans in VMware SRM 6.5

In this article, we are going to cover Recovery Plan. We will see how you can create a Recovery plan. A recovery plan specifies how Site Recovery Manager recovers the virtual machines in the protection groups that it contains. You can include one or more protection groups in a recovery plan.

Step by Step Guide: –

  • Login to Site Recovery Manager Console. To do so, go to Web Client and Open vCenter Server. Go to Home Page and Click on Site Recovery.
  • Under Site Recovery Console, Click on Recovery Plans. You will get Objects tab there. Click on Create Recovery Plans.

2018-08-28 00_21_01-vSphere Web Client

  • Enter a name for Recovery Plan and Select a location for this recovery plan. Click on Next.

2018-08-28 00_21_24-vSphere Web Client

  • Select the site to which the VMs in this plan will recover. Here I have choosed my Recovery Site. Click on Next.

2018-08-28 00_21_28-vSphere Web Client

  • Select Protection Group you want to add to this Recovery Plan. You can add more than one Protection Groups in a Recovery Plan. Click on Next.

2018-08-28 00_21_32-vSphere Web Client

  • Select the test networks and Click on Next.

2018-08-28 00_21_34-vSphere Web Client

  • Recovery Plan is Ready to Complete. Click on Finish.

2018-08-28 00_21_36-vSphere Web Client

  • Review the Recovery Plan under Recovery Plan tab.

2018-08-28 00_21_43-vSphere Web Client

That’s all from Site Recovery Manager Configuration part. SRM is ready to execute DR. Now in next article, we will see how to execute test and Disaster Recovery. Stay Tuned.

Take a look in below topics, explore and learn Site Recovery Manager: –

Learn SRM – Part 11 – Configure Protected Groups in VMware SRM 6.5

In Previous post, we explored how to created Placeholder Datastore. Now we are going to Configure Protected Groups in VMware SRM.

Protection group is a collection of virtual machines that Site Recovery Manager protects together. Let’s take an example you have any specific set of Virtual machines i;e App VMs, DB VMs. You can group them together in Protected Group. In Array based replication, when you create Protection group, you group the virtual machines on the basis of replicated datastores. When you create protection group, you group specific datastores to that protection group. And migration all Virtual machine to those datastores which is part of Protection groups. Make sure that datastores are replicated to recovery site.

You can include one or more protection groups in a recovery plan. A recovery plan specifies how Site Recovery Manager recovers the virtual machines in the protection groups that it contains.We will see this in next article.

Let’s jump to the Step by Step guide to Create Protection Group. Here I am create only one Protection group. You can create many depending on your requirement.

  • Login to Site Recovery Manager console. vCenter Server > Home > Site Recovery
  • Click on Protected Groups.

2018-08-27 23_19_29-vSphere Web Client

  • Go to Objects tab and Click on Create Protection Group.

2018-08-28 00_17_53-vSphere Web Client

  • Give a name to Protection Group.

2018-08-28 00_18_07-vSphere Web Client

  • Select the protected site and protection group type.
  • Select Array Pair and Click on Next.

2018-08-28 00_18_11-vSphere Web Client

  • Select Datastores you want to add to this Protection Group. You can choose multiple datastores in one Protection group. Click on Next.

2018-08-28 00_18_19-vSphere Web Client

  • Review your settings and Click on Finish.

2018-08-28 00_18_22-vSphere Web Client

  • Protection Group has been created. Review it under Objects tab.

2018-08-28 00_18_29-vSphere Web Client

That’s all from this article. We are moving to next article which is to create Recovery Plan in VMware SRM. Stay Connected.

Take a look in below topics, explore and learn Site Recovery Manager: –

Learn SRM – Part 10 – Create Placeholder Datastore in VMware SRM 6.5

Welcome back to the new article on VMware SRM. This topic will cover how to Create Placeholder Datastore in VMware SRM. I am using VMware SRM 6.5.

For every virtual machine in a protection group, Site Recovery Manager creates a placeholder virtual machine at the recovery site. You must identify a datastore on the recovery site in which Site Recovery Manager can store the placeholder virtual machines.

After you select the datastore to contain the placeholder virtual machines, Site Recovery Manager reserves a place for protected virtual machines in the inventory on the recovery site. Site Recovery Manager creates a set of virtual machine files on the specified datastore at the recovery site and uses that subset to register the placeholder virtual machine with vCenter Server on the recovery site.

Step by Step: –

  • To create Placeholder Datastore at both site, you need to login to VMware SRM console.
  • Select Protected Site and go to Placeholder datastores tab.
  • Click on Box icon under placeholder datastores tab.

2018-08-27 23_16_20-vSphere Web Client

  • Go to Sites > Manage and Click on Placeholder Datastore. Click on OK. Make sure that you have already created this datastore in Protected Site’s Virtual Center.

2018-08-27 23_16_27-vSphere Web Client

  • Perform the same step for Recovery Site. Select Recovery Site under Sites.
  • Go to Placeholder datastores. Click on Box icon.

2018-08-27 23_18_29-vSphere Web Client

  • Select Placeholder datastore for Recovery Site. Make sure that you have already created this datastore in recovery Site’s Virtual Center.

2018-08-27 23_18_39-vSphere Web Client2018-08-27 23_18_39-vSphere Web Client

Placeholder datastores have been created in both site.

2018-08-27 23_18_43-vSphere Web Client

That’s all from this article. We are moving to next article which is to Configure Protected Group in VMware SRM. Stay Connected.

Take a look in below topics, explore and learn Site Recovery Manager: –